![contax 645 apo-tessar contax 645 apo-tessar](https://i.ebayimg.com/images/g/Ho8AAOSw~U5bKwd6/s-l400.jpg)
- CONTAX 645 APO TESSAR FULL SIZE
- CONTAX 645 APO TESSAR ISO
- CONTAX 645 APO TESSAR PROFESSIONAL
- CONTAX 645 APO TESSAR SERIES
In the latter case, the images can not be on the 2- inch - LCD of the camera display screen. The data can be saved either in JPEG, TIFF or Contax-specific RAW format.
CONTAX 645 APO TESSAR ISO
The effective resolution is 6.04 megapixels (2008 × 3008), sensitivities from ISO 25 to 400 are available. The sensor is of the CCD type and comes from Philips.
CONTAX 645 APO TESSAR FULL SIZE
a sensor in the full size of the 35mm format. It was the first digital SLR camera to have a full-format sensor, i.e. The Contax N Digital (sometimes also referred to as Contax ND) was announced as early as 2000 when the Contax-N system was presented, but was not actually available until 2002. The operating concept has been changed compared to the Contax N1. The Contax NX has a built-in flash unit for this purpose, but is overall smaller and at 605 g also lighter than the Contax N1 (795 g). The viewfinder of the Contax NX shows only 93% instead of 95% of the image, the viewfinder screens are not exchangeable. The most important differences are the slower shutter (shortest flash sync speed 1/125 s instead of 1/250 s, shortest shutter speed 1/4000 s instead of 1/8000 s) and the slower film transport with 2.3 instead of 3.5 frames per second. The Contax NX, which has been simplified in some points, appeared in 2002 as an inexpensive alternative to the Contax N1. The shortest flash sync time is 1/250 s, the shortest shutter speed can be set to 1/8000 s. The Contax N1 has time, aperture and program automatic as well as tracking measurement. However, the low speed of the autofocus system was unanimously criticized.
CONTAX 645 APO TESSAR SERIES
A new feature is the focus bracketing function, which uses the principle of exposure series to take several pictures with slightly different focus. The four external focus points can be selected in groups. The autofocus has 5 focusing points, one in the middle and four on the format diagonals. The N1 was the first Contax with an autofocus according to the usual functional principle with focusing of the lens, after the Contax AX had previously realized the unusual principle of focusing by moving the film plane. Functionally, however, nothing was left to be desired.
CONTAX 645 APO TESSAR PROFESSIONAL
The camera housing was made of a metal / plastic mixed construction, which already made it clear that the new N1 should not be a successor to the professional Contax RTS III. the shutter speed dial to the left of the viewfinder, but the entire appearance was redesigned and rather untypical for Contax. Compared to earlier Contax cameras from the Contax / Yashica system, some typical features have been retained, such as: B.
![contax 645 apo-tessar contax 645 apo-tessar](https://fujiaddict.com/wp-content/uploads/2016/12/DSC08200_dkil6f.jpg)
The first camera in the new N system was the Contax N1 in 2000. However, there are currently no signs of a future for the system. The brand name Contax still belongs to Carl Zeiss AG, which was initially also looking for a new partner for the Contax-N system. This means that the Contax-N system has been taken out of sale after only five years. On April 12, 2005, Kyocera announced its withdrawal from the field of photo technology on September 30, 2005. Many previous users of the earlier Contax cameras had long since switched to systems from other manufacturers, the others remained largely true to the old system, which was also maintained to a modest extent. Because of this and because of the unusually high price level, also for Contax standards, the Contax-N system had little success. The lenses continued to come from Zeiss, but the choice of lenses always remained modest and did not even come close to reaching the scope of the range of Zeiss lenses for the Contax / Yashica system. The Contax-N system comprised the cameras N1, NX and N Digital as well as a comprehensive range of accessories. This already met the requirements of digital SLR cameras with full-format sensors which require a beam path as perpendicular as possible to the sensor surface. The bayonet had an unusually large diameter, and the back focus was also particularly large at 48 mm. A completely new system with a new lens bayonet has now been introduced. The previous Contax small picture SLR system (also known as the C / Y or RTS system), which was compatible with Yashica, was characterized by hesitant and delayed adaptation to the state of technology while at the same time being of a very high level of quality. At Photokina 2000, Kyocera surprised everyone with the announcement of a completely new Contax system.